Manual # 650593A
Buzzer Connector
4. Connect the provided Main Harness and the Buzzer (optional for audio feedback) to the back of the
HDX system.
3. Place the HDX system into the bezel, taking care to align all mounting holes. Using the
seven (7) provided #6-20x1-1/4” screws and washers; secure the gauges to the bezel. Pay
special attention to align all visible surfaces before tightening the provided hardware. Some
bezels may be bowed and not perfectly straight, requiring slight adjustments.
2. Detach the lens from the bezel and separator plate by removing the two (2) screws shown below.
The only item to be reused is the original front bezel and hardware.
