Manual # 650597A
4. Place the HDX system into the bezel, taking care to align all mounting holes. Secure the
three (3) provided countersunk screws on the bottom mounting points; move to the top and
secure the three (3) pan head screws.
2. Remove the stock gauges, separator plate, and lens from the bezel. The only item to be reused is
the original front bezel; the other pieces can be discarded. Now is a good time to clean or refinish
the bezel.
3. Peel the paper off the two block off lenses that
match the bezel and, on the back of the housing,
place them shiny side down in the two indicator
openings in the center. Use silicone to hold them in
place and avoid handling until the block off lenses
are secure.
