Manual # 650649
6. Re-install the cluster into the vehicle and refer to the main manual for wiring instructions to
complete the HDX installation.
4. Secure the HDX system to the bezel by using the (8) eight supplied ½” screws. Watch
carefully as you insert the system so you don’t scratch or damage the lens or switch buttons.
5. Connect the provided harness and the buzzer (optional for audio feedback) to the back of the
HDX system.
7. Removing the stock gauge eliminates the illumination for the gear indicator during headlight. The
supplied gear indicator block off lens can be used if so desired.
Buzzer Connector
