Dakota Digital GPS-50-2, Руководство пользователя

Страница: 3 / 8

3 MAN #650519:B
Using speed from the GPS-50-2 with a BIM-01-x connected
•
Make sure the BIM units are all connected to the gauge control box with the supplied BIM power/data cables.
•
Hold the SW1 switch from the gauge system control box while turning the key on. The message display should
show SETUP.
•
Release SW1. The message display should show SPEED.
•
Press and hold SW1. The message display should show SENDER. Release SW1.
•
Press and release SW1 until NORMAL is displayed.
•
Press and release SW1 until DONE is displayed.
•
Turn the key off.
•
Next, press and hold the switch on the GPS-50-2 while turning the key on. The GPS-50-2 display should show
the current software revision.
•
Release the switch. The display should show ì-C- ”.
•
Press and hold the switch until “ - ” is displayed.
•
Release the switch. The display should show “SPD”.
•
Press and hold the switch until “ - ” is displayed.
•
Release the switch. The display will show the current setting.
•
Press and release the switch until “OFF” is displayed.
•
Press and hold the switch until “ - ” is displayed.
•
Turn the key off.
•
Connect the GPS-50-2 SPEED 1 terminal to the gauge control box SPD SND terminal.
To set or change the GPS clock ID number and the time format:
•
Hold the switch beside the GPS-50-2 terminal strip while turning the key on. The display will show the current
revision code while this is held.
•
Release the switch. The display will show “ -C- ”.
•
Press the switch and hold the switch until “ - ” is displayed.
•
Release the switch. The BIM display will show “ spd ”.
•
Press and release the switch until “ CL ” is displayed.
•
Press the switch and hold the switch until “ - ” is displayed.
•
Release the switch. The display will show the current ID for the GPS clock.
•
Press and release the switch to change the setting from 1 - 16 or OFF . OFF will prevent the GPS clock from being
displayed.
•
Press and hold the switch to save the setting. The BIM display will show “ 12H ” or “ 24H ”.
•
Release the switch. This is the current time format.
•
Press and release the switch to change between 12 hour and 24 hour format.
•
Press and hold the switch until “ - ” is displayed to save the settings.
•
Turn the key off.