background image

MAN # 650810 

 
 

Music Mode 

If you intend to use the music mode feature: it is best to install the module somewhere near a speaker so music can be 
picked up by the microphone. Depending on how loud you like your music, proximity of the BIM-RGB module to the 
speaker can be adjusted to get the sensitivity you would like. If the m

usic is too loud the LED’s will appear to be on all the 

time since it can overload the microphone. If the music is too quiet the LED’s may not flash at all. This may require some 
experimentation to get this to meet your individual taste. 
Loud exhaust and convertible wind noise will affect the lighting making the LEDs appear on all the time, or the LEDs may 
flash when tapping the throttle. 

 

Controlling the BIM-RGB with the Dakota Digital Accessories App 

The Dakota Digital Accessory App (green icon) can connect by Bluetooth to setup the BIM-RGB module. 
The app is available from Google Play for Android/Google devices and the Apple Store for iPhones and iPads. 

App Connecting and pairing: 

 

Apple devices do not need to be paired.  Just have the BIM-RGB powered up and open the Dakota Digital 
Accessory App, as it will automatically pair in the background. 

 

Android devices must be paired prior to opening the Dakota Digital Accessory App.  In Settings > Connections > 
Bluetooth, the scanning will find a device starting with DDX…  Tap to pair and tap “Pair”.  Then open the app. 
Future connections will not require pairing as the BIM-RGB is in the list of Bluetooth devices. 

App Operation: 
Once the app is open, tap on the BIM-RGB from the list.  

Tap on “Setup” and then tap on “Lighting”. 

App Options: 

LIGHTS 

On or Off 

Turn LEDs on or off 

SYNC TO GAUGE 

On or Off 

Synchronize to HDX/RTX gauges for colors (Off = stand-alone mode) 

MUSIC MODE 

On or Off 

Turn music mode on or off 

INTENSITY 

Slider 

1 is dimmest, 31 is brightest 

COLOR 

Drop down options 

Pick colors when not syncing to gauge 

CALIBRATE COLOR 

New screen w/sliders 

Fine tune or reset color modifications* 

SET TO CURRENT 

Button 

save current settings at power off, and to return when powered on. 

RESET TO FACTORY  Button 

Full reset of colors and options 

 

Any changes not saved with 

“Set to Current” are only temporary until the key is turned off. 

*Calibrated Color Options: 

RED / GREEN / BLUE sliders 

Sliders: range from 0 to 31 

Individually adjusts intensity of each color 

RESET ADJ 

Button 

Resets the color sliders of current session 

RESTORE COLOR 

Button 

Restore noted color back to default 

RESTORE ALL  

Button 

Restore all colors back to factory default 

SAVE & EXIT 

Button 

Saves calibrated settings and exits to 

“Lighting” screen 

 

Not tapping “SAVE & EXIT” will not save color changes when ignition is turned off. 

 

 

Содержание BIM-RGB













Отзывы: