MAN #650636
System Setup:
EFI system setup
User configuration in Megasquirt-2, Microsquirt and other MS2 based ECUs
The settings are on the CAN-Bus/Testmodes menu:
•
CAN-Bus/Testmodes -> CAN Parameters Set
Master enable to "Enable"
•
CAN-Bus/Testmodes -> Dash Broadcasting Set Enable to "On"
•
Ensure Configuration is set to 'Automatic' setting.
User configuration in Megasquirt-3, MS3-Pro, MS3-Gold and other MS3 based ECUs
The settings are on the CAN-Bus/Testmodes menu:
•
CAN-Bus/Testmodes -> CAN Parameters Set
Master enable to "On"
•
CAN-Bus/Testmodes -> Dash Broadcasting Set
Enable to "On"
•
Ensure Configuration is set to 'Automatic' setting.
***Optional******Enable engine oil pressure and boost/vacuum
•
To monitor engine oil pressure, yo
u must have a pressure sensor connected on either ‘Generic sensor input 1’ or ‘Generic
sensor input 2’.
•
Boost/vacuum pressure is measured from the MAP sensor reading.
•
CAN-Bus/Testmodes -> CAN Realtime Data
Broadcasting
•
Set Enable realtime data broadcasting over
CAN to "On"
•
To enable boost CAN output set “02: Baro,
MAP, MAT, CLT” to ‘ON’(MS2)/50Hz(MS3)
•
To enable engine oil pressure CAN output
set “13: sensors 1,2,3,4” to
‘ON’(MS2)/50Hz(MS3)
