V I S T A I N S T A L L A T I O N A N D O P E R A T I O N MA N U A L
12
Reset computer mouse command
This command sends a mouse-reset command to the currently selected computer. Don't confuse
this command with the reset command, which resets the mouse itself. This command can be used to
recover a stuck mouse on NT and Windows 95/98. To issue the command, press and release the
left
Control Key, then type "O".
Do not use this on older computers that can not recover the mouse by plugging a mouse in directly,
as it will make the mouse go out of sync.
Reset to factory default
The settings that have been previously set and saved in non-volatile memory can be returned to their
factory default settings. This can be useful when the unit is being moved to a new installation or to
put the settings into a known condition for troubleshooting. To perform this operation, hold in the "1"
and the "2" membrane buttons on the front panel and press and release the "reset" button. At least
one CPU must be correctly connected to the unit, so that the unit can be powered. The activity LED
will flash three times to signify that the non-volatile memory has been returned to the original factory
default settings listed in Appendix C.
Rackmount kit
The rackmount kit is an optional item that can be ordered at any time. Your Vista unit is designed to
accept the rack-mount mounting brackets. There are three sizes available 19" by 1.75", 23" by 1.75",
and 24" by 1.75". The most common rack style is 19".
