Dakota Alert CAD-05 Kit GSM Скачать руководство пользователя страница 13

Страница: 13 / 16

HOw TO ReSeT THe AUTO DIAleR

Inside the battery compartment:

Remove the power supply and the Auto Dialer from the wall. Remove the 7.2V battery. Then

remove the SIM card. Inside the battery compartment is a switch. Move it to the ERASE

position. Connect the power to the Auto Dialer then press DELETE twice. There will be 2

short beeps from the Auto Dialer. Switch the power off again. Replace the SIM card, place

switch back to NORMAL. Replace the 7.2V battery and place back onto the wall. Power the

Auto Dialer back up. The Auto Dialer will then return to factory default setting.

NOTe AND CAUTION:

A leaking battery will result in poor performance and could damage the system. It is

recommended that the batteries be periodically checked. Change the batteries at least

once a year to maintain the system.
DO NOT mount the Auto Dialer in areas that are exposed to extreme heat or moisture, as

this could adversely affect the performance of the system.
Use only a damp cloth and general household cleaning agent to wipe the unit clean. DO

NOT use turpentine, thinner, gasoline or similar substances to clean the unit.

CAD-05 Kit Manual.indd 13

10/15/2009 9:40:53 AM

Содержание CAD-05 Kit GSM

















Результаты поиска

Содержание CAD-05 Kit GSM

Отзывы:

Бренды по названию

Популярные бренды

Dakota Alert CAD-05 Kit GSM, Руководство пользователя

Результаты поиска

Содержание CAD-05 Kit GSM

Отзывы:

Бренды по названию

Популярные бренды