DAKO F9S50GE-FIXWD, Руководство пользователя

Страница: 36 / 36

35
8) Recommended solutions for the problems _
Product does not operate.

The plug of the product (earthed) is possibly not plugged into the socket. Make
sure it is plugged into the socket.
 The fuse blows or fails. Inspect the fuses in the fuse board. If it is disengaged,
engage it again
Steam goes out when the oven operates
• Steam going out of the oven during operation is normal. It is not a failure
Clanging is heard when the product is getting hot and cold.
 The metal parts may make a sound due to expansion at time of heating. It is not a
cause of failure
Oven is not getting warm.

No power supply. Make sure whether power is available at home and inspect the
fuses in the fuse board. If required, engage the fuses again.

For versions equipped with timer, the timer is not set. Set the time or bring it to the
manual (hand) symbol.

The function and/or temperature switch is not set. Set the function and/or
temperature switch.
Oven light does not turn on

No power. Make sure whether power is available at home and inspect the fuses in the
fuse board. If required, engage the fuses again.

Oven light is damaged. Replace the oven light.
Problems with the gas oven

Burner burns late when ignition is performed. Control the gas pressure
whether your product operates at the set pressure (see the nameplate in the
rear).

The burner turns off when it burns for a while. Control the gas pressure
whether your product operates at the set pressure (see the nameplate in the
rear).

Do not use the cylinder regulator as set.
If the problem is not eliminated although you have applied the instructions given in this
section, consult to the dealer or authorized service center. Do not try to repair the any
failed product yourself.