
Assembly (continued)
6
Step Three: Finish broadcast kit assembly
1. Remove hex plug from pump outlet.
2. Push broadcast lance into broadcast bracket. Note orientation.
3. Install hose barb into open port on pump. Hand tighten, then one turn with a wrench.
4. Connect 24” hose from pump to broadcast lance using two hose clamps. Follow hose
clamp instructions below.
5. Thread broadcast nozzle hand tight onto the end of the lance. Note orientation.
Remove the
hex plug
Hose clamp installation instructions
1. Slide hose clamp over the end of the hose
2. Push the hose onto the hose barb
3. Slide the hose clamp over the hose barb
4. Tighten the hose clamp
24” hose
Broadcast
lance
Hose barb
Hose clamp
Hose clamp
Broadcast
nozzle
Содержание M803994
Страница 2: ...Hazard Signal Word Definitions 2 ...
Страница 15: ...15 This page was intentionally left blank ...