2
Transmitter Installation:
1
2
●
●
Stick the Transmitter on the wall or the door with double-sided adhesive tape (see image 2).
Drill two holes on the wall where desired. The holes are about 6mm in diameter. The
distance between the two holes is about 36mm. Insert two wall plugs (included) into both
holes. Secure the Transmitter cover with two screws. Insert two screws (included) into the
wall plugs. Now close the Transmitter (see image 1).
Battery Installation(Transmitter):
●
Use a screwdriver to ply open the Transmitter cover. Gently twist the screwdriver to open.
●
Place the CR2032 battery (included).
CR2032 3V
Lithium
Battery