DAITEM SH271AX, Руководство по установке

Страница: 2 / 22

GB
100
Built-in
magnetic
contact
External
contact(s)
LED
indicator
lamp
Test
button
Screw
cover
Contents
1. Introduction ........................... 100
2. Preparation ............................ 102
2.1 Opening ............................ 102
2.2 Power supply.................... 102
3. Programming......................... 103
4. Configuration......................... 104
5. Connection............................. 108
6. Installing ................................. 109
6.1 Choosing the best place .. 109
6.2 Fixing method................... 109
6.3 Installing the magnet
holder ................................ 110
6.4 Connecting external
contacts ............................ 112
7. Testing .................................... 114
8. Maintenance .......................... 116
8.1 Battery low indication....... 117
8.2 Changing the battery........ 117
9. Technical data ....................... 118
1. Introduction
The multicontact detector is used
to protect openings such as doors
& windows. It is fitted with:
• a built-in magnetic contact (reed
switch),
• a terminal block for connecting
external contacts such as:
- magnetic contacts (flush or
surface mounted, wide gap,
etc.),
- external roller shutter blind
sensors,
- piezo-electric glassbreak
sensors,
- shock sensors,
- pressure mats,
- other non-specific sensors.
IMPORTANT
• Some functions are only available with versions 2.0.0 or later
(press on the control panel keypad to check
the version).
• The operating differences with former ranges are described in the
compatibility booklet available in the Daitem installers section at
www.daitem.co.uk.