4123 Series User Manual
Specifications
D004-000017
5
6.0
Specifications
Table 2 — Model 4123xx Technical Specifications
MATERIALS
All materials comply with IEC 60529 IP66 Standards
Enclosure and Hardware
Model 4123
Carbon Fiber
1
, 6061-T6 Aluminum
Model 4123AC, 4123AD, 4123AE
A356.2 Cast Aluminum
Model 4123AF
Machined Aluminum 6061-T6
MECHANICAL
See dimentional drawings - See
Section 7.6 Model 4123(xx) Series Mechanical Drawings
ENVIRONMENTAL
Model 4123
1
Ingress Protection
IP66
Operating Temperature (No Heater)
-0ºC to 40ºC
Storage Temperature
-0ºC to 40ºC
Relative Humidity
5% to 95%
Model 4123AC
Model 4123AD
Model 4123AE
Model 4123AF
Ingress Protection
IP66
Operating Temperature (No Heater)
-20ºC to 55ºC
Storage Temperature
-20ºC to 75ºC
Relative Humidity
5% to 95%
ELECTRICAL
Voltage
100-240VAC 47-63Hz
Current
1.8A
AIR REQUIREMENTS
Air Pressure
N/A
DISPLAY
Resolution (max)
1024x768
Viewing Angle
80º x 80º
Typical Brightness
600 nits
Color Depth
24 bit
7.0
Models/Components
The Model 4123 Series Portable PC is based upon five (5) unique base models incorporating a standard
set of components/options for each model. In addition to the standard components/options, each model has
a specific glandplate designed for it.
7.1
Base Model 4123 Series Configurations
The Model 4123 Series Portable PCs are designed around five (5) distinct models with a standard set
of critical components. Each of these models are defined by specific base model configurations as
shown in Table 3 below.
Table 3 — 4123(xx) – UL Listed, ATEX Zone 2 Certified Model Configurations
Model Number
Enclosure Material
Processor
Hard Drive
RAM
Misc.
Glandplate Assembly
4123
Carbon Fiber
1
Intel Core i7-2610UE 128GB Slim SATA 16GB
Battery B/U
I640-002303
4123AC
Cast Alluminum
Intel Core i7-6600U
256GB SSD
16GB
WiFi
I640-002325
4123AD
Cast Alluminum
Intel Atom-E3845
128GB SSD
8GB
WiFi
I640-002322-01
4123AE
Cast Alluminum
Intel Core i7-6600U
256GB SSD
16GB
N/A
I640-002323
4123AF
Machined Alluminum Intel Core i7-2610UE 128GB SSD
16GB
WiFi
I640-002325
1
- Option 821 (Sun Visor) must be used to meet the Special Condition requirement to maintain ATEX Zone 2 Certification if
the Model 4123 carbon fiber faceplate is exposured to ultra violent light.