31. ESC m
Cut the paper (partial cut)
[Code]
[1Bh] + [6Dh]
[Outline]
The command performs a partial cut (one point remaining in the
middle).
The command is valid only at the beginning of a line.
32. ESC p
Generate a drawer-kick pulse
[Code]
[1Bh] + [70h] + m + n1 + n2
[Range]
{ 0 <=
n1
<= 255 }
{ 0 <=
n2
<= 255 }
[Outline]
The value of
m
is ignored.
The printer generates a 2*
n1
milliseconds long pulse and 2*
n2
milliseconds long rest after the pulse.
n2
must be at least four
times greater than
n1
or the command will be discarded.
33. ESC v
Transmit printer status
[Code]
[1Bh] + [76h]
[Outline]
Current printer status is transmitted over the serial interface.
Status sent out consists of 1 byte.
Bits Meaning:
Bit 0: Paper error = 1, otherwise = 0;
Bit 1: Reserved;
Bit 2: Printer's head temperature is too high = 1, otherwise = 0;
Bit 3: Reserved;
Bit 4: Printer is started = 1, otherwise = 0;
Bit 5: Printer is busy = 1, otherwise = 0;
Bit 6: Reserved;
Bit 7: Reserved.
34. ESC s
Save configuration
[Code]
[1Bh] + [73h]
[Outline]
Saves all printer configuration and User Font to non-volatile
memory.
Next time printer will start with the saved configuration.
[Caution]
There is a button sequence to reset all settings to defaults.
35. GS D n
Select the intensity level (2-nd variant)
[Code]
[1Dh] + [44h]
[Range]
{E2h <=
n
<= 1Eh}
[Outline]
Set the intensity level to
n
percents
n
is a signed byte value with range from -30 to +30%.
Negative value of
n
is represented as 256 - n
[Caution]
Higher intensities lead to lower print speed.
There is another variant of this commad (see ESC commands).
[Default]
The initial value of n is 0.
[See also]
ESC Y
Содержание 1200
Страница 1: ...Daisy 1200 ESC POS PRINTER User s manual...
