These instructions do not purport to cover all details or variations in equipment nor to provide for every possible contingency to be met in connection with installation, operation
or maintenance. Should further information be desired or should particular problems arise which are not covered sufficiently for the purchaser’s purposes, the matter should be
referred to GE Current, a Daintree company.
www.gecurrent.com
© 2021 Current Lighting Solutions, LLC. All rights reserved. GE and the GE monogram are trademarks of the
General Electric Company and are used under license. Information provided is subject to change without notice.
All values are design or typical values when measured under laboratory conditions.
DT107 (Rev. 03/29/2021
Installation Guide
Daintree
®
Wireless
Occupancy Sensor, Recess Mount
(WOS2-RM)
Questions:
Web:
products.gecurrent.com
Phone:
1-866-855-8629
Power Supply
(2) Lithium-thionyl chloride batteries
(Li-SOCl2) AA 3.6V (included)
Battery Life
5 years (normal operation)
Radio Properties
2.4 GHz, +7dBm transmit power
Sensor Coverage
360°, 500 sq. ft (WOS2-RM-S)
(maximum)
360°, 1000 sq. ft (WOS2-RM-E)
Off-Delay TImer
30 seconds (fixed), additional delay
time configurable in CSM
Operating
14°F to +122°F (-10°C to 50°C)
Environment
Indoor use only
Compliance
FCC Part 15B, FCC ID: NRH-ZB-Z100B ICES/
NMB-003 Class B, IC: 8984A-Z100B
Mounting
Recess ceiling mount (2 screws) Maximum
Ceiling Thickness: 1”
Dimensions
Diameter x Depth: 4.6” x 2.6”
117mm x 67mm)
Weight (without battery): 2.85 oz. (81g)
Specifications
CAUTION
RISK OF EXPOSURE IF BATTERY IS REPLACED BY AN
INCORRECT TYPE. DISPOSAL OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS
WOS2-RM
8
Industry Canada (IC) Warning Message
Product complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and radiates radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encourage to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna;
• Increase the separation between the equipment and receiver;
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected;
• Consult the dealer or an experienced radio/TV technician
for help.
Operation is subject to the following two conditions:
1.
This device may not cause harmful interference;
2.
This device must accept any interference received, including
interference that may cause undesired operation.
7
FCC Warning Message
