Installation Guide
Albeo
®
AHH2
LED Luminaire
Provide at least 12” of clearance from the top of the fixture to any ceiling or surface above.
A
Section 1: Unit Installation
-10V (+)
Gray
0-10V (–)
Fixture Weight
ABR1-Series
Max. Weight (lbs.)
Attach to
structural
member
Fasten
with nuts
Single Fixture
See Note
See Note
Dual Fixture
Dual Fixture
Single Fixture
Attach to
structural
member
Attach to
structural
member
2
Section
2
: Pendant Mounting
A
B
C
Tighten
screw
Black
To AC Main
White
Green
Purple (+)
Gray (-)
Line
Neutral
Ground
0-10V(+)
0-10V(-)
To 0-10V
Dimmer
LED Driver
D
E
B
C
Carefully unpack unit and properly inspect
for defects before installing. Wear work
gloves to prevent dirt and oil from being
transferred to the luminaire.
Choose a mounting method: chain or cable,
rod mount, or pendant mount.
NOTE
: For applications requiring the “R” corrosion resistant finish, use mounting hardware appropriate for the environment
AC power cord
pendant mount cover
Attach pendant mou
nt cover
t
o
¾” NPT
conduit
with at least 3 full threads of
engagement.
Determine rotation of
luminaire
and lock orientation in place
withprovided set screw.
Lift
luminaire
up and hang on pendant
mount
cover
using hinge piece.
Feed the AC power
lead wire
through
the conduit and into the junction box.
Swing
luminaire
closed and secure with the
slide clip. Lock slide clip in place with screw.
Connect the green (ground), black (line)
and white (neutral) wires of the AC line to
the similarly colored wires of the
luminaire's
lead wire
using UL listed wire connectors.
Close junction box.
For dimming options, connect purple
and gray leads to dimming control that
is certified and suitable for the
hazardous locations involved, rated
0-10V min. A 10V signal corresponds
to 100% lumen output. A 0V signal
corresponds to ~10% lumen output.
Cap purple and gray leads separately
when not used.
