Robot Safety Controller
사용자
매뉴얼
DAINCUBE Corp.
7 / 22
2.
Warranty and warranty coverage
DAINCUBE's products are delivered only after passing strict quality inspection before shipment.
2.1.
Warranty period
The warranty period is as follows
12 months after our shipment.
2.2.
Scope of the warranty
Where a defective condition occurs during proper use conditions and obviously under the responsibility
of the manufacturer, within the term above, we shall repair the product without charge.
However, any items that apply to the following are excluded from the warranty coverage.
The warranty is not valid if the defect is due to accidental damage, mishandling, misuse, voltage
fluctuation, high/low voltage or natural disaster.
If the product is repaired or tried to repair from unauthorized personal/Repair Shop.
If the product serial number is tempered.
The product is defective due to wear of parts, which can be considered as consumable parts by the
nature. (such as a cable)
Defects resulting from changes over time such as natural color fading of paint.
Defects resulting from mishandling or improper use.
Defects resulting from an inadequacy or error in maintenance and inspection.
Defects resulting from the use of any part other than our genuine parts.
Defects resulting from a modification not approved by us or our dealers.
Only a delivered product shall be singly warranted, and no damage induced by the defect of the
delivery product can be warranted. For repair, transport the product to our factory.
2.3.
Service coverage
The cost of a delivered product does not include expenses for program creation and engineer
dispatching. Therefore, the following are charged separately even within the warranty term:
Maintenance and inspection.
Technical guidance and technical training in the operating instructions.
Technical guidance and technical training on program-related matters such as program creation.
2.4.
Fire extinguish
Please use the CARBON DIOXIDE fire extinguisher to extinguish a fire in a robot (instrument, controller).
