Electrical Box
Si001654EA
8
Removal Procedure
3. Electrical Box
Warning
Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Step
Procedure
Points
1
Remove the 3 screws,
and then the wire
fixture.
2
Remove the 7 screws
on the terminal board
and disconnect the
connecting wire and
power supply wire.
3
Disconnect the
connector [S20] and
pull out the clamp.
[S20]: electronic expansion
valve coil
When reassembling,
connect the connectors in
the following order.
(1) [S40]
(2) [S80] (Heat Pump only)
(3) [S20]
(4) [S70]
Wire fixture
(R23194)
Terminal board
Connecting wire
Power supply wire
(R23195)
[S20]
Clamp
(R23196)