Daikin VRV W T-series Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 44

Daikin VRV W T-series Скачать руководство пользователя страница 13

English 12

Operation

1

Dry

Return

Setting

●

Press Mode button several times until the Dry mode is selected.

* The dry mode may not be available depending on the type of indoor unit.

2

On/Off

Menu

OK

●Press On/Off button.

The Operation lamp (green) will illuminate and the system will start

operating.

* In Dry mode, the system maintains automatic temperature and fan speed control. Therefore, temperature

setpoint or fan speed settings are not available while the indoor unit is in the Dry mode.

3

●

Adjust Air Flow Direction from the main menu

(see page 17)

.

* If the connected indoor unit model does not include oscillating louvers this function will not be available.

4

On/Off

Menu

OK

●When the On/Off button is pressed again, the system will stop operating

and the operation lamp will turn off.

Note

●

To prevent water damage or system failure, do not immediately remove power from the indoor

unit following system operation. Wait at least five minutes for the condensate pump to finishing

draining residual water from the unit.

Characteristic of Dry mode

The Dry mode dehumidifies the space at reduced cooling capacity to prevent the room

temperature from dropping to uncomfortable levels.

Setback

The Setback feature will maintain the space temperature in a specific range during unoccupied periods.

Note

● This function will temporarily start an indoor unit that was previously turned off by the user or turned off from a schedule

event / off timer.

●

This function must be enabled by the system installer.

«
...
11
12
13
14
15
...
»

Содержание VRV W T-series













































Отзывы:

Нет отзывов