Daikin VRV III RXYQ_PTJU, Инженерные данные

Страница: 14 / 52

EDUS39-802A-R1_a Field Wiring
RXYQ-P Heat Pump (208-230V) 13
6. Field Wiring
RXYQ72, 96, 120, 144PTJU
3D058621
L3
(TRANSMISSION LINE)
L2
L3
SWITCH
POWER SUPPLY
POWER SUPPLY
L1
FUSE
L1
L1
L1
MAIN SWITCH
SWITCH
FUSE
L2
6) Unit shall be grounded in compliance with the applicable local and national codes. 7) Wiring shown are general points-of-connection guides only and are not intended for or to include all details for a specific installation. 8) Be sure to install the switch and the fuse to the power line of each equipment. 9) Install the main switch that can interrupt all the power souces in an integrated manner because this system consists of the equipment utilizing the multiple power sources. 10) If there exists the possibility of reversed phase, lose phase, momentary blackout or the power goes on and off while the product is operating, attach a reversed phase protection circuit locally. Running the product in reversed phase may break the compressor and other parts.
L2
FUSE
L1
(TRANSMISSION LINE)
SWITCH
L2
L1
L2
(TRANSMISSION LINE)
L2
(TRANSMISSION LINE)
Notes 1) All wiring, components and materials to be procured on the site must comply with the applicable local and national codes. 2) Use copper conductors only. 3) As for details, see wiring diagram. 4) Install ground fault circuit interrupter for safety. 5) All field wiring and components must be provided by licensed electrician.
FUSE
FUSE
MAIN SWITCH
SWITCH
L2
L1
SWITCH
(POWER LINE)
2 WIRES CABLE
2 WIRES CABLE
2 WIRES CABLE
2 WIRES CABLE
2 WIRES CABLE
(POWER LINE)
2 WIRES CABLE
INDOOR UNITS
OUTDOOR UNITS
2 WIRES CABLE
(POWER LINE)
(POWER LINE)
2 WIRES CABLE
(POWER LINE)
2 WIRES CABLE