Daikin VAM 500EJ, Руководство по обслуживанию

Страница: 32 / 81

Si-93 Control Functions
Control Functions 23
2) Link control of 2 or more groups (zone link)
■
Heat reclaim ventilation unit can be operated when one or more air conditioners are operating.
■
Allows independent operation of heat reclaim ventilation unit from VRV-system remote controller during
interim periods (direct duct connection is not allowed in this system).
■
ON/OFF operation is not possible from LCD remote controller of heat reclaim ventilation unit.
Note: With Super Wiring, units of different outdoor systems can be linked in operation.
1.2.5 Field Setting, Service Mode
1. Field setting
Used for initial setting of heat reclaim ventilation unit.
2. Service mode
Used for confirmation of unit Nos. in the group and reallocation of unit Nos.
List of Field Setting and Service Mode
Group
1
Group
2
(HL024)
Group
3
Adapter PCB
for remote control
(KPR2A61)
Remote controller
for air conditioner
Remote controller
for air conditioner
Remote controller
for air conditioner
Details of setting Mode Setting
mode
Setting
switch
No.
Setting position Operation
method
01 02 03 04 05 06
Group No. setting
for centralized
controller
(individual) Field
setting 00(30)
Refer to P-54
Filter cleaning time
setting 17(27) 0 2500 hr. 1250 hr. No
integration — — —
Refer to P-53
Pre-cool/pre-heat
On/Off setting 2 Off On — — — —
Pre-cool/pre-heat
time (min.) setting 3 30 min. 45 min. 60 min. — —
Fan speed initial
setting 4 Normal Ultra-High — — — —
Setting for cold
area (Fan
operation selection
for heater
thermostat OFF) 5 No duct Normal Cold area function (Fan switch selection when
heating thermostat Off)
With duct Normal With duct
Fan Off Fan Off Fan L Fan Off Fan L
Centralized/
individual setting 7 Invalid Valid — — — —
Centralized zone
interlock setting 8 Off Individual setting when zone interlock On —
No ventilation
only Cleaning
only Ventilation
+Cleaning —
Pre-heat time
extension setting 9 0 30 min. 90 min. 60 min. — —
External signal
setting 18(28) 0 Last
command Priority on
external
input — — — —
Setting for direct
power-on 1 Off On — — — —
Auto restart setting 2 Off On — — — —
Humidifying
operation setting 3 Only for
heating
mode For all
mode — — — —