![background image](http://html1.mh-extra.com/html/daikin/super-multi-nx-ftxs15hvju/super-multi-nx-ftxs15hvju_service-manual_2459136010.webp)
Removal of Electrical Box
Si04-955
8
Removal Procedure
4. Removal of Electrical Box
Procedure
Warning
Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Step
Procedure
Points
1. Disconnect the each
harness.
Preparation
Remove the front grille
according to "Removal of
Front Grille".
1
Remove the screw and
remove the drip proof
plate.
2
Remove the screw of
the earth / ground wire
and cut the clamp.
Be careful not to lose the clip
for the thermistor.
3
Pull out the indoor heat
exchanger thermistor.
4
Disconnect the
connector for the fan
motor [S1].
(R5345)
Drip proof plate
(R5346)
Indoor heat
exchanger
thermistor
Earth /
ground wire
(R18587)
Clip
(R11234)
[S1]
(R5348)