20
English
WARNING
•
Do not use petrol, benzine, thinner, polishing compound, paraffin, alcohol, etc. (An electric shock, fire or cracking may result)
•
Do not wash the main unit with water. (An electric shock, fire or malfunction/breakage may result)
Maintenance
Deodorising Filter Unit
When odour or dirt becomes an issue
Vacuum clean
Do not use water
•
Remove from the unit together with the frame
and remove dust using a vacuum cleaner.
•
If odour becomes an issue, leave the part in
a shaded, breezy area. (about 1 day)
• Do not scrub the surface.
• Do not use water when cleaning. (If water is
used, the part will lose its shape and become
unusable.)
►
Page 24
Do not detach
the deodorising
filter from frame
Removing
Hold the lever and grip of the deodorising filter
unit and remove.
Lever
Grip
Attaching
Fully insert the deodorising filter unit.
Push until you
hear a catching
sound
•
If the deodorising filter unit is detached or not
properly attached, the odour sensor lamp will blink.
Dust Collection Filter
Filter tag
About every 10 years
Replace
Do not use water Do not vacuum clean
• Do not use a vacuum cleaner or use water
when cleaning.
(If the filter is damaged or holes are opened
etc., dust will pass through the filter and
capacity for dust collection will be reduced.)
About part replacement timing
•
Replacement timing depends on usage patterns and
the location of the unit.
Standard replacement time is about 10 years
assuming that the unit is used daily in a home where
5 cigarettes are smoked a day. (Calculation in
accordance with testing method of Japan Electrical
Manufacturers’ Association JEM1467 standard)
If the impurity content of the ambient air is high, the
filter will need more frequent replacement.
Replace the dust collection filter if the filter is failing
to perform.
About purchasing and disposal
•
Refer to “Separately Sold Part”.
►
Page 22
Removing
1
Remove the deodorising filter unit.
Dust collection filter
2
Pull the filter
tag upward.
3 Hold the lower part of the dust
collection filter and lift it out.
Attaching
1
Install a new dust collection filter, paying
attention to the orientation.
Side with tag and
markings should face
toward you and arrow
should point up
2
Attach the deodorising filter unit.
Attention
•
Make sure that the dust collection filter and deodorising filter unit are attached to the main unit when the unit is operating.
If these parts are not attached when the unit is operated, malfunction/breakage may result.
• Observe in order to prevent discolouration or deformation.
• If detergent is used, be sure to wipe it up thoroughly so none remains.
•
If warm water is used, make sure that it is 40ºC or less.
• Do not leave parts to dry in direct sunlight.
• Do not dry parts using a dryer.
•
Do not apply fire to parts.
• If using a vacuum cleaner, be sure not to apply force to or hit the part. (Damage may result)
01_EN_3P595629-1B.indd 20
2020/04/17 16:01:55
