Daikin SkyAir RZAG100M7V1B, Руководство по установке для специалистов, Страница: 8 / 36

4 About the units and options
Installer reference guide
8
RZAG71~Y1
Sky Air Alpha-series
4P486046-1A – 2017.08
CAUTION
To avoid injury, do NOT touch the air inlet or aluminium
fins of the unit.
3.2.3 To remove the accessories from the
outdoor unit
ENERG IJA Y
IA IE
ENERG IJA Y
IA IE
2
1×
3
1
1× 2× 1×
a b c
1× 1×
d e
a General safety precautions
b Outdoor unit installation manual
c Cable tie
d Fluorinated greenhouse gases label
e Energy label
4 About the units and options
4.1 Overview: About the units and
options
This chapter contains information about:
▪ Identifying the outdoor unit
▪ Combining the outdoor unit with options
4.2 Identification
NOTICE
When installing or servicing several units at the same time,
make sure NOT to switch the service panels between
different models.
4.2.1 Identification label: Outdoor unit
Location
Model identification
Example: R Z A G 140 M7 V1 B [*]
Code Explanation
R Air-cooled split outdoor unit
Code Explanation
Z Inverter
A Refrigerant R32
G High-end series
71~140 Capacity class
M7 Model series
V1 Power supply: 1~, 220~240 V, 50 Hz
Y1 Power supply: 3N~, 380~415 V, 50 Hz
B European market
[*] Minor model change indication
4.3 Combining units and options
4.3.1 Possible options for the outdoor unit
Refrigerant branch kit
When connecting multiple indoor units to the outdoor unit, you need
one or more refrigerant branch kits. The outdoor‑indoor combination
determines which and how many refrigerant branch kits to use.
Layout Model name
Twin KHRQ(M)58T
Triple KHRQ(M)58H
Double twin KHRQ(M)58T (3×)
For more selection details, see the catalogues. For installation
instructions, see the installation manual of the refrigerant branch kit.
Bottom plate heater (EKBPH140L7)
▪ Prevents freeze-up of the bottom plate.
▪ Recommended in areas with low ambient temperature and high
humidity.
▪ For installation instructions, see the installation manual of the
bottom plate heater.
Demand adaptor kit (SB.KRP58M52)
▪ Includes the additional mounting plate (EKMKSA2)
▪ Can be used for the following:
▪ Low noise: To lower the operation sound of the outdoor unit.
▪ I-demand function: To limit the power consumption from the
system (example: budget control, limit power consumption
during peak moments…).
▪ For installation instructions, see the installation manual of the
demand adaptor kit.
5 Preparation
5.1 Overview: Preparation
This chapter describes what you have to do and know before going
on-site.
It contains information about:
▪ Preparing the installation site
▪ Preparing the refrigerant piping
▪ Preparing the electrical wiring
5.2 Preparing the installation site
Do NOT install the unit in places often used as work place. In case
of construction works (e.g. grinding works) where a lot of dust is
created, the unit must be covered.