3 About the system
User reference guide
4
ATXP20~35L2V1B
Daikin room air conditioner
4P513685-2 – 2017.11
f
e
g
m
l
ON/OFF
h
i
k
j
c d
b
a
a
Air inlet
b
Air outlet
c
Flap (horizontal blade)
d
Louvers (vertical blades)
e
Front panel
f
Model name plate
g
Room temperature sensor
h
Signal receiver
i
Operation lamp (green)
j
Timer lamp (orange)
k
Indoor unit ON/OFF switch
l
Titanium apatite deodorizing filter
m
Air filter
ON/OFF button
If the user interface is missing, you can use the ON/OFF button on
the indoor unit to start/stop operation. When operation is started
using this button, the following settings are used:
▪ Operation mode = Automatic
▪ Temperature setting = 25°C
▪ Airflow rate = Automatic
3.2
About the user interface
▪
Direct sunlight.
Do NOT expose the user interface to direct
sunlight.
▪
Dust.
Dust on the signal transmitter or receiver will reduce
sensitivity. Wipe off dust with a soft cloth.
▪
Fluorescent lights.
Signal communication might be disabled if
fluorescent lamps are in the room. In that case, contact your
installer.
▪
Other appliances.
If the user interface signals operate other
appliances, move the other appliances, or contact your installer.
▪
Curtains.
Make sure that the signal between the unit and the user
interface is NOT blocked by curtains or other objects.
NOTICE
▪ Do NOT drop the user interface.
▪ Do NOT let the user interface get wet.
3.2.1
Components: User interface
i
a
b
j
k
l
n
m
c
d
e
f
g
h
a
Display (LCD)
b
Auto button
c
Direct operation button
d
Temperature adjustment button
e
Comfort button
f
Powerful button
g
ON timer button
h
Signal transmitter
i
OFF button
j
Fan setting button
k
Econo button
l
Swing button
m
OFF timer button (Night set mode)
n
Timer cancel button
3.2.2
Status: User interface LCD
Icon
Description
Operation mode = Automatic
Operation mode = Drying
Operation mode = Heating
Operation mode = Cooling
Operation mode = Fan only
Powerful operation is active
Econo operation is active
The indoor unit receives a signal from the user
interface
Current temperature setting
Airflow rate = Automatic