Daikin Siesta ATXM20R2V1B, Руководство пользователя

Страница: 54 / 60

9 | Troubleshooting
User reference guide
54
ATXM20~3 ATXM5 ATXM20~35R5V1B
Daikin room air conditioner
4P518786-6F – 2020.06
9.3 Troubleshooting for wireless LAN connection
The following table provides a brief description of how to deal with some
problems. If none of the following solutions fix the problem, go to
http://
www.onlinecontroller.daikineurope.com/ for more information and FAQ.
Problem Measure
Connection to the wireless LAN is not
possible (none of the LEDs on the
indoor unit display are blinking). ▪ Try operating the unit with the user
interface.
▪ Check if the power is on.
▪ Turn the unit off and back on again.
The wireless LAN is NOT visible on the
unit overview screen (Home screen)
after configuration of the WLAN
adapter (WPS option). ▪ Make sure the wireless LAN is close
enough to the communication device.
▪ Check if communication is OK.
▪ Make sure that the smart device is
connected to the same wireless
network as the wireless LAN.
▪ Try resetting to the factory default
and repeat the setting. See
"To reset
the connection setting to the factory
default"
[
4
37].
The wireless LAN is NOT visible in the
available Wi-Fi networks list on the
smart device (Access point option). ▪ Try switching between access point
and WPS setting to change the
wireless
channel. The wireless
channel MUST be between 1~13.
▪ Check if communication is OK.
▪ Try resetting to the factory default
and repeat the setting. See
"To reset
the connection setting to the factory
default"
[
4
37].
Displayed indoor/outdoor temperature
value in Daikin Residential Controller
differs from the value measured by
other appliances. ▪ Daikin Residential Controller displays
indoor/outdoor temperature only for
the
indoor/outdoor unit's
surrounding.
▪ Measured temperature for other
appliances may differ due to different
condition around the unit (e.g. direct
sunlight, frost accumulation…)
▪ Temperature displayed in Daikin
Residential
Controller is only
referential.