Daikin RXYSQ4P8V1B, Руководство по установке

Страница: 27 / 36

RXYSQ4~Y1B
VRVIII-S System air conditioner
4PW68122-1 – 02.2011
Installation manual
23
Setting mode 1
The H1P led is off (COOL/HEAT selection setting).
Setting procedure
1 Push the button and adjust the led indication to either
one of the possible settings as shown below in the field marked
:
2 Push the button and the setting is defined.
Setting mode 2
The H1P led is on.
Setting procedure
1 Push the button according to the required function
(A~F). The led indication that matches the required function is
shown below in the field marked
:
2 When the button is pushed, it indicates the current
setting.
3 Push the button according to the required setting
possibility as shown below in the field marked .
3.1 Possible settings for function A, B and F are (ON) or
(OFF).
3.2 Possible settings for function C
The noise of level 3< level 2< level 1 ( ).
3.3 Possible settings for function D and E
For function D ( ) only: the noise of level 3<
level 2< level 1 ( ).
For function E ( ) only: the power consumption of
level 1< level 2 < level 3 ( ).
4 Push the button and the setting is defined.
5 When the button is pushed again, the operation
starts according to the setting.
Refer to the service manual for more details and for other settings.
Confirmation of the set mode
The following items can be confirmed by setting mode 1 (H1P
led is off)
Check the led indication in the field marked .
1 Indication of the present operation state
2 Indication of COOL/HEAT selection setting
3 Indication of low noise operation state
1 In case of COOL/HEAT setting by each individual outdoor unit
circuit.
2 In case of COOL/HEAT setting by the master unit when outdoor
units are connected in multiple-system combination
(*)
.
(*) It is necessary to use the optional external control adapter for
outdoor unit (DTA104A61/62). See the instruction delivered with
the adapter.
3 In case of COOL/HEAT setting by the slave unit when outdoor
units are connected in multiple-system combination
(*)
.
H1P H2P H3P H4P H5P H6P H7P
1
x x c x x x x
2
x x x c x x x
3
x x x x c x x
Possible functions
A additional refrigerant charging operation.
B refrigerant recovery operation/vacuuming operation.
C automatic low noise operation setting at nighttime.
D low noise operation level setting ( ) via the external
control adapter.
E power consumption limitation setting ( ) via the external
control adapter.
F enabling function of the low noise operation level setting
(
) and/or power consumption limitation setting
( ) via the external control adapter (DTA104A61/62).
H1P H2P H3P H4P H5P H6P H7P
A
w x w x w x x
B
w x w x w x w
C
w x w x w w x
D
w x w w x x w
E
w x w w w w x
F
w x x w w x x
H1P H2P H3P H4P H5P H6P H7P
ON
w x x x x c x
OFF
(*)
(*) This setting = factory setting.
w x x x x x c
BS2 SET
BS3 RETURN
BS2 SET
L.N.O.P
DEMAND
L.N.O.P
DEMAND
BS3 RETURN
BS2 SET
ON OFF
H1P H2P H3P H4P H5P H6P H7P
OFF
(*)
(*) This setting = factory setting.
w x x x x x x
w x x x x x c
w x x x x c x
w x x x x c c
H1P H2P H3P H4P H5P H6P H7P
w x x x x x c
(*)
(*) This setting = factory setting.
w x x x x c x
w x x x c x x
NOTE When finished, please mark the settings of function C,
D and E in the "Records" part of the label on the
backside of the front plate.
x
normal
w
abnormal
c
under preparation or under test operation
H1P H2P H3P H4P H5P H6P H7P
x x w x x x x
1 When set to COOL/HEAT change-over by each individual outdoor
unit circuit (= factory setting).
2 Indication on master unit when COOL/HEAT change-over is
carried out by outdoor units connected in multiple system-
combination.
3 Indication on slave unit when COOL/HEAT change-over is carried
out by outdoor units connected in multiple system-combination
H1P H2P H3P H4P H5P H6P H7P
1
(*)
(*) This setting = factory setting.
x x w x x x x
2
x x x w x x x
3
x x x x w x x
x
standard operation (= factory setting)
w
operation
H1P H2P H3P H4P H5P H6P H7P
x x w x x x x
1
1
2
3
L.N.O.P
1
DEMAND
3
1
2
3
BS3 RETURN
BS3 RETURN
L.N.O.P
L.N.O.P