Daikin RXTM30R2V1B, Руководство по установке для специалистов

Страница: 46 / 68

9 | Electrical installation
Installer reference guide
46
RXTM-R_RXTP-R_ARXTP-R_RXTA-B
R32 split series
4P518023-11H – 2021.03
9 Electrical installation
In this chapter
9.1 About connecting the electrical wiring .................................................................................................................................. 46
9.1.1 Precautions when connecting the electrical wiring .............................................................................................. 46
9.1.2 Guidelines when connecting the electrical wiring ................................................................................................ 48
9.1.3 Specifications of standard wiring components ..................................................................................................... 49
9.2 To connect the electrical wiring to the outdoor unit ............................................................................................................ 49
9.1 About connecting the electrical wiring
Before connecting the electrical wiring
Make sure:
▪ The refrigerant piping is connected and checked
▪ The water piping is connected
Typical workflow
Connecting the electrical wiring typically consists of the following stages:
1 Making sure the power supply system complies with the electrical
specifications of the units.
2 Connecting the electrical wiring to the outdoor unit.
3 Connecting the electrical wiring to the indoor unit.
4 Connecting the main power supply.
9.1.1 Precautions when connecting the electrical wiring
DANGER: RISK OF ELECTROCUTION
WARNING
ALWAYS use multicore cable for power supply cables.
INFORMATION
Also read the precautions and requirements in the "2 General safety
precautions" [
4
7].
INFORMATION
Also read "9.1.3 Specifications of standard wiring components" [ 4 49].
WARNING
▪
All wiring MUST be performed by an authorised electrician and MUST comply
with the applicable legislation.
▪
Make electrical connections to the fixed wiring.
▪
All components procured on-site and all electrical construction MUST comply
with the applicable legislation.