Daikin RTSQ10PY1, Руководство по обслуживанию

Страница: 126 / 226

2XWOLQHRI&RQWURO,QGRRU8QLW 6L(1%(
)XQFWLRQ
Microcomputer dry operation Heating Operation
Fan Operation
Thermostat status
A
A
A
OFF
Yes
ON
No
Suction air temperature
*7
*8
*9
*10
*11
Thermostat status
No
No
*14
*15
(Option)
(Option)
(Option)
(Option) (Option)
(Option)
: OFF
MP
52H
Humidifier Mu
52H
Humidifier Humidifier Humidifier Mu
52H
Mu
52H
Humidifier Mu
52H
Mu
(option)
: OFF MP
MF
MF
20E :
20E :
MP
Swing flap
Swing flap
Set wind direction
Fan MF:
Operating with set air flow rate
20E :
Yes
Yes
No
No
No
*12
*13
*12
Yes
Yes
Yes
Swing flap?
Swing flap
Set wind direction
Fan :
Operating with set air flow rate
MF
Electronic expansion valve
Capacity control
20E : 20E : 20E :
Fan :
LL operation
MF
Fan :
Operating in L mode
MF
Fan :
Stop
MF
b a
-2 -4
Suction air temp.
Set temp.
b
a
(3)
(2)
(1)
(3)
(2)
(1)
Closed
Closed
DEFROST/HOT START
indicating lamp: OFF
Closed Open
Is
outlet air
temperature drop protection
in progress?
DEFROST/HOT START
indicating lamp: ON
*9. Fan operation
By setting the remote control to Fan, the fan will
operate with thermostat OFF in set temperature
control operation mode.
*10. Set wind direction
According to wind direction instruction from the
remote controller, the wind direction is set to
100% horizontal while in heating operation.
*11. Fan
According to fan speed instruction from the
remote control, the fan is put into operation in
LL mode while in heating operation.
*12. Wind direction
When the heating thermostat turns OFF, the wind direction will be set to 100% horizontal.
*13. Hot start
If the condenser inlet temperature exceeds 34
°
C at the time of starting operation or after the
completion of defrost operation, or until 3 minutes pass or Tc is above 52
°
C, hot starting will be
conducted.
*14. Thermostat status
*15. Outlet air temperature drop protection
When the set temperature is below 24
°
C or the electronic expansion valve opening is small, the
protection will be activated.
Microcomputer
dry display
Fan :
Operating in L mode
Electronic
expansion valve
Superheated degree control
Fan : Operating in L
mode after it stops for 6 min.
Electronic
expansion valve
Drain pump kit
: OFF after 5-min.
residual operation
*7. Microcomputer dry display
No set temperature and air flow rate of the remote control are displayed.
*8. Thermostat status
Set temperature when operating the microcomputer dry mechanism.
Is defrost
operation in
progress?
Is hot
starting in progress?
Restart
prevention operating
in progress?
(4 min.)
Is test run
in progress?
Drain
pump kit
Aux. electric
heater
: OFF
: OFF
Aux. electric
heater
: OFF
: OFF
: OFF
: ON
: ON
: ON
: OFF
: OFF
Aux. electric
heater Aux. electric
heater Aux. electric
heater
Electronic
expansion valve
Electronic
expansion valve
Electronic
expansion valve
Drain
pump kit