Operating instructions
6
Daikin RoCon HP
Daikin Control
008.1420844 – 05/2014
3
x
Operation
3
Operation
3.1
General
DANGER!
If electrical components come into
contact
with
water
,
this can cause an
electric shock
as well as cause
potentially fatal injuries and burns.
●
The
displays and
the
buttons
on the Control
must be protected from the
effects of
moisture
.
●
To
clean
the Control use a
dry cotton cloth
.
Using aggressive
cleaning agents
and other
liquids
can cause
damage to equipment or lead
to an electric shock
.
Maximum energy utilisation
The most effective energy utilisation is achieved by the
Daikin Altherma EHS(X/H) at the lowest possible
return flow and hot water temperatures.
If an external heat generator (e.g. the optional backup
heater) is used at inflow target temperatures of over
50 °C, the efficiency (COP) of the Daikin Altherma
EHS(X/H) can be affected negatively (depending on
the outside temperature).
3.2
Display and operating elements
1
Clear text display
2
Setting: Configuration
3
Setting: Remote Param
4
Rotary switch
5
Setting: Info
6
Setting: Operating Mode
7
Setting: Set Temp Day
8
Setting: Set Temp Night
9
Setting: DHW Set Temp
10
Rotary button
11
Setting: DHW Install
12
Setting: Time Program
13
Exit button
Fig. 3-1
Arrangement of display and operating elements
3.2.1 Display
All the operating steps are supported by appropriate displays in
the clear text display on a coloured background.
Menu guiding is available in 7 different languages
(see section 3.4.8).
Malfunctions are generally indicated by a fault code and
a clear text fault message on the display.
For troubleshooting instructions refer to chapter 6.
The colour of the backlighting indicates the operational status
and the operational mode:
White:
Standard lighting, normal operational display.
Red:
Fault status, depending on the type of fault, the
Daikin Altherma EHS(X/H) continues to function with
restrictions.
Green:
Operating mode with operator authorisation.
Blue:
Operating mode with expert authorisation.
1
Date display
2
Status of refrigerant com-
pressor
3
Display of expert login
4
Display time
5
Current flow temperature
6
Status heating circuit
7
Current outdoor temperature
8
Active operating mode
9
Status of hot water genera-
tion
10
Current storage tank temper-
ature
Fig. 3-2
Display of the Control - standard display
Explanation of symbols
Item
Symbol
Explanation
2
Flashing: Heat pump demand active
Permanently on: Refrigerant compressor is
working
2
No connection to the external heat pump
unit
3
Access Rights Expert active
(see section 3.6.1)
2 / 3
Air Purge active (see section 3.6.10)
2 / 3
Terminal function active (see section 3.4.9)
2 / 3
Frost protection function active
(see section 3.6.5)
2 / 3
Temporary timer programme "Party" active
(see section 3.4.7)
