Daikin RN50HV1A, Руководство по демонтажу

Страница: 8 / 15

Removal of Outdoor Fan / Fan Motor Si011084
6 Removal Procedure
4 Cut the 3 clamps and
release the fan motor
lead wire.
„
Put the fan motor lead wire
through the back of the fan
motor when reassembling so
as not to be entangled with
the outdoor fan.
5 Remove the nut and
remove the outdoor fan.
„
Nut size: M6
„
When reassembling, align
the
mark of the outdoor
fan with the D-cut section of
the motor shaft.
6 Remove the 4 screws
and remove the fan
motor.
„
Be sure to remove the lower
screws first. If the upper
screws are removed first, the
fan motor may tilt or fall
because the center of its
gravity is toward the front.
It may cause injuries.
Step Procedure Points
(R5404)
(R3249)
Lead wire Outdoor fan
D-cut
(R5405)
10 mm
(R12236)
(R5406)