Daikin RGVF18ASV16, Руководство по установке, Страница: 47 / 48

11
Operation Manual of Remote Controller (ARC91A151)
1. Signal transmitter
Sends signals to the indoor unit.
2. Display (LCD):
Displays the current settings.
(In this illustration, each section is shown with its displays on for the purpose of
explanation).
3. TEMPERATURE Adjustment button:
To change the temperature setting by pressing TEMP UP and TEMP DOWN buttons.
Press to raise the temperature and press to lower the
temperature.
COOL Operation :
Û&
5. ECONO button:
8. POWER CHILL button:
POWER CHILL
operation quickly Maximizes the cooling effect in
COOL
and
DRY
operation only. In this
mode, the air conditioner operates at maximum capacity.When POWER CHILL is activated , the flaps will be
adjust at maximum air flow position.
POWER CHILL operation ends in 20 minutes. Then the system automatically operates again with the previous
settings which were used before POWER CHILL operation.
7. CHILD LOCK button:
Setting the CHILD LOCK disables all the buttons except the CHILD LOCK button.This function prevents
children from operating the remote controller by mistake. Press this button for about 5 seconds, CHILD
LOCK will be enabled and following the same manner, CHILD LOCK can be disabled.
6. SWING button:
User can adjust the airflow direction to increase your comfort. The flaps will begin to swing.
4. ON/OFF button:
Press this button once to start the operation.
Press once again to stop the operation.
ECONO operation enables efficient operation by limiting the maximum power consumption.
Press this button once to start the
ECONO
RSHUDWLRQ6HWWHPSHUDWXUHLVÛ&(Fixed) and fan speed is
set to medium (Not changeable).
Press once again to disable the ECONO operation, last set parameters memorised will be recalled which
were set before ECONO operation.
ECONO operation can only be set when unit is running. Pressing ON/OFF button causes the ECONO to
be cancelled.
ECONO operation functions in COOL mode only.
ECONO and POWER CHILL operation cannot be used at the same time.
Priority is given to the function of whichever button is pressed last.
TEMP UP TEMP DOWN
1
DRY or FAN Operation : The temperature setting cannot be changed and is not
VKRZQRQUHPRWH/&'
NOTE:
a) As per BEE guidelines, whenever air conditioner will be switched on from
remote, the default set temperature will be set as mentioned in below table :
4 7
POWER CHILL operation cannot be used with ECONO and COANDA operation. Priority is given to the function
of whichever button is pressed last. POWER CHILL operation can only be set when unit is running. Pressing
ON/OFF button causes the settings to be cancelled. The temperature and airflow rate(fan) settings cannot be
changed during POWER CHILL operation.
In this function the air flow direction will be upwards.