Maintenance
Reset Filter Indicator
Operation
1
Cool
Time to clean filter
Set to
Cool
74
F
• When it is time to clean or replace the filter, one of the following messages will appear
on the bottom of the basic screen.
“Time to clean filter”
“Time to clean filter & element”
“Time to clean element”
• Wash, clean, or replace the filter or element.
For details, refer to the Operation Manual supplied with the indoor unit.
2
• Reset the filter indicator when the filter or element is cleaned or replaced.
•
Press Menu/OK button.
The main menu screen will appear.
3
Setting
Main Menu
Reset Filter Indicator
Air Flow Direction
Ventilation
Schedule
Off Timer
Celsius / Fahrenheit
1/2
Cool
Set to
Cool
74
F
•
Press
buttons to select
Reset Filter Indicator
on the main menu
screen and press Menu/OK button.
•
The message shown in illustration 1 will disappear from the basic screen
when the filter sign is reset.
Maintaining the Unit and LCD Display
•
Wipe the LCD and surface of the remote controller with a dry cloth when they become dirty.
•
If the dirt on the surface cannot be removed, soak the cloth in neutral detergent diluted with water, squeeze the cloth tightly,
and clean the surface. Wipe the surface with a dry cloth.
Note
•
Do not use any paint thinner, organic solvent, or strong acid.
6
3P362438-10J English
01_EN_3P362438-10J.indd 6
11/30/2016 13:32:56
