background image

(4) For products on which a manufacture date is not indicated, if the date the owner purchases the residence from the builder or the date the 

product is originally installed cannot be verified, the installation date is the date the condensing unit to which the product is paired was 
originally installed.

How Long Does Warranty Coverage Last?

The warranty lasts for a period up to 1 YEAR.  
The warranty period does not continue after the control is removed from the location where it was originally installed. The replacement of a 
part under this warranty does not extend the warranty period. In other words, Goodman warrants a replacement control only for the period 
remaining in the applicable warranty that commenced on the installation date.

What Will Goodman Do To Correct Problems?

Goodman will furnish a replacement control, without charge for the control only, to replace any control that is found to be defective due to 
workmanship or materials under normal use and maintenance. Furnishing of the replacement control is Goodman’s only responsibility under 
this warranty and the furnishing of the replacement control is the owner’s only remedy.
THE OWNER AGREES THAT THESE REMEDIES ARE THE OWNER’S EXCLUSIVE REMEDIES FOR BREACH OF ALL WARRANTIES, EXPRESS OR 
IMPLIED.

What Won’t Goodman Do To Correct Problems?

Goodman will not pay for:
·  Labor, freight, or any other cost associated with the service, repair, or operation of the control.
·  Electricity or fuel costs, or increases in electricity or fuel costs, for any reason, including additional or unusual use of supplemental electric 

heat.

·  Lodging or transportation charges.

WHETHER ANY CLAIM IS BASED ON NEGLIGENCE OR OTHER TORT, BREACH OF WARRANTY OR OTHER BREACH OF CONTRACT, 
OR ANY OTHER THEORY, NEITHER GOODMAN NOR ANY OF ITS AFFILIATES SHALL IN ANY EVENT BE LIABLE FOR INCIDENTAL OR 
CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LOST PROFITS, LOSS OF USE OF A CONTROL, EXTRA UTILITY EXPENSES, 
OR DAMAGES TO PROPERTY.

Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion may not 
apply to you.

How Can The Owner Receive Warranty Service?

If there is a problem with the control, contact a licensed contractor. 
To receive a replacement control, a licensed contractor must bring the defective control to a Goodman heating and air conditioning products 
distributor. 
For more information about the warranty, contact Consumer Affairs at 877-254-4729 or write to Consumer Affairs, 19001 Kermier Rd, Waller, 
TX 77484.  
This warranty gives you specific legal rights, and you may also have other rights that vary from state to state or province to province.

Quebec Residents

The arbitration provisions of this warranty shall not apply to residents of Quebec.

Non-Owner Occupied Warranty

Products installed in non-residential buildings or in residences not occupied by the owner are warranted for a period of 1 YEAR. 

THIS 

WARRANTY IS PROVIDED IN LIEU OF ANY OTHER WARRANTIES, WHETHER BY GOODMAN OR ANY OF ITS AFFILIATES, EXPRESS OR 
IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE

. Subject to the 

additional limitations set forth in this paragraph, all other provisions of the Limited Warranty apply to products installed in non-residential 
buildings or in residences not occupied by the owner.

Where Can Any Legal Remedies Be Pursued?

ARBITRATION CLAUSE. IMPORTANT. PLEASE REVIEW THIS ARBITRATION CLAUSE. IT AFFECTS YOUR LEGAL RIGHTS.
1. Parties: This arbitration clause affects your rights against Goodman and any of its affiliates or employees or agents, successors, or assigns, 

all of whom together are referred to below as “we” or “us” for ease of reference.

2. 

ARBITRATION REQUIREMENT: EXCEPT AS STATED BELOW, ANY DISPUTE BETWEEN YOU AND ANY OF US SHALL BE DECIDED BY 

NEUTRAL, BINDING ARBITRATION RATHER THAN IN COURT OR BY JURY TRIAL.

 “Dispute” will be given the broadest possible meaning 

allowable by law. It includes any dispute, claim, or controversy arising from or relating to your purchase of this control, any warranty 
upon the unit, or the unit’s condition. It also includes determination of the scope or applicability of this Arbitration Clause. The arbitration 
requirement applies to claims in contract and tort, pursuant to statute, or otherwise.

3. 

CLASS-ARBITRATION WAIVER: ARBITRATION IS HANDLED ON AN INDIVIDUAL BASIS. IF A DISPUTE IS ARBITRATED, YOU AND WE 

EXPRESSLY WAIVE ANY RIGHT TO PARTICIPATE AS A CLASS REPRESENTATIVE OR CLASS MEMBER ON ANY CLASS CLAIM YOU MAY 
HAVE AGAINST US OR WE AGAINST YOU, OR AS A PRIVATE ATTORNEY GENERAL OR IN ANY OTHER REPRESENTATIVE CAPACITY. 
YOU AND WE ALSO WAIVE ANY RIGHT TO CLASS ARBITRATION OR ANY CONSOLIDATION OF INDIVIDUAL ARBITRATIONS

.

Содержание Premium Mini D2270













































Отзывы: