![background image](http://html1.mh-extra.com/html/daikin/pcsmt1420a/pcsmt1420a_manual_2460266004.webp)
Options required for specific operating environments
High-efficiency filter
Available in two types: 65% and 90% colorimetry.
Using this kit, a
duct can be fitted
to increase the
intake of outdoor
air.
*Connecting ducts, insect nets, fire dampers, air filters, and other
parts should, as required, be procured locally.
**Outside Air fan interlocked with air conditioning unit is necessary.
Optional PCB(KRP1C63)is required for interlocking.
***It is recommended that the volume of outdoor air introduced
through the kit is limited to 10% of the maximum airflow rate of the
indoor unit. Introducing higher quantities will increase the
operating sound and may also influence temperature sending.
Fresh air intake kit
Even in smoky environments where
the air conditioning is on most of
the time, the ultra long-life filter only
has to be changed once a year.
Ultra long-life filter
Panel spacer
Use when only minimal space is available between drop
ceilings and ceiling slabs.
Sealing material of air discharge outlet
Sealing material block air discharge openings not used in
2-way or 3-way blow.
Branch duct
(direct-connection round duct)
Outside
Note: Use of options will increase operating sound.
The units can be installed in the following different ways.
Note: Some ceiling constructions may hinder installation.
Contact your Daikin Dealer before installing your unit.
Direct installation type
Flexible duct
T-joint pipe
Intake duct
(procured locally)
(duct length: 4 m max.)
Intake duct
(procured locally)
(duct length: 4 m max.)
Connection
chamber
Suction
chamber
Duct flange
(with insulation
material)
Intake duct
(procured locally)
Chamber type
(with T-joint pipe and without fan)
Flexible duct
(procured locally)
T-joint pipe
(procured locally)
Chamber type
(without T-joint pipe and fan)
KDDP55X160
KDDP55B160K
KDDP55B160
Easier to maintain
With Ultra long-life filters (option), maintenance is not required in normal shops or offices
for up to four years.
The condition of the drain pan and
drain water can be checked by
removing the drain plug and
intake grille.
Drain plug
Just open the
intake grille!
40
mm
Panel spacer
A round duct can be attached without the need for a chamber.
A flanged port for direct connection of a round duct is
provided. An existing branch duct chamber can also be fitted
(square slit hole).
Connection
chamber
Suction
chamber
Smoky atmosphere: annual filter change
Ordinary store or office: filter change every 4 years
*For dust concentration of 0.3 mg/m
3
(Requires separately sold Air Cleaner.)
1 year (Approx. 5,000 hr) 15 hr/day x 28 day/month x 12 month/year
*For dust concentration of 0.15 mg/m
3
4 years (Approx. 10,000 hr) 8 hr/day x 25 day/month x 4 years
Note:
Quick and easy to install
Just 256 mm high. Installable in tight
ceiling spaces
(13-26M)
Fine square panels
Compact body and quiet operation
*Temperature-sensor on indoor unit must be used when the air conditioner is controlled from another room.
**Wireless remote controller does not have a temperature-sensor.
Note : Anechoic chamber
conversion value, measured
according to JIS parameters
and criteria. During
operation these values are
somewhat higher owing to
ambient conditions.
Note: Air direction is set to the standard position when the unit is shipped from the factory.
The position can be changed from the remote controller.
Panel size is same for all models, FCNQ13-48M.
It is easy to maintain a neat appearance when
multiple units are installed.
Optimal comfort and convenience
assured by 2 air discharge modes
Both indoor unit and wired remote controller (option) contain temperature-
sensors. Temperature sensing can be set at the unit or, to further improve
comfort level, closer to the target area at the wired remote control.
This
feature must be set during commissioning by the technicians.
Two selectable temperature-sensors
Even in spaces with high ceilings, a comfortable airflow is carried down to
the floor level.
Suitable for high ceilings
Operation starts when the preset time of the ON timer elapses and stops
when the preset time of the OFF timer elapses.
On/Off timer
Indoor unit
High
Low
dB(A)
13/18M
31
28
21/26M
35
28
30/36M
43
32
42M
44
34
48M
44
36
Same for
all models
Air direction
Auto air
direction control
Settable to 5 different
levels between 15° and 60°
Settable to 5 different
levels between 25° and 60°
Auto-swing between
15° and 60°
Auto-swing between
25° and 60°
Recommended for shops with
light coloured ceilings that
must be kept spotless.
Standard position to
prevent draft.
Standard setting
Setting to prevent soiling of ceiling
*
The air direction is set automatically to the
memorised position of the previous air direction.
Desired
situation
Auto-swing
5-levels
air direction
setting
*Closing of the corner discharge outlets is recommended.
Number of air discharge outlets used
4-way
flow
3-way
flow
2-way
flow
4-way
flow
3-way
flow
2-way
flow
3.1 m
3.4 m
4.0 m
All round
flow
2.7 m
3.0 m
3.5 m
3.0 m
3.3 m
3.5 m
3.5 m
3.8 m
-
3.4 m
3.9 m
4.5 m
All round
flow
3.2 m
3.6 m
4.2 m
3.6 m
4.0 m
4.2 m
4.2 m
4.2 m
-
Standard
Ceiling
height
High ceiling
High ceiling
Criteria for ceiling height and number of air discharge outlets
950
mm
950
mm
Note: Factory settings are for standard ceiling height and all-round flow.
High ceiling settings (1) and (2) are set with the remote controller by field setting.
256 mm
*
1
266 mm
*
2
*1 298 mm high with 30-48M
*2 308 mm high with 30-48M
All models can be installed without
using lifter because of the light weight.
Drain pump is equipped as standard
accessory with 850 mm lift.
Transparent drain socket
Each corner of the unit has an Adjuster Pocket that
lets you easily adjust the unit's suspended height.
Since the orientation of
the intake grill can be
adjusted after installing,
the direction of the intake
grill lines can be unified
when multiple units
are installed.
Note: If the wireless remote control option is installed, a light receptor
unit is housed in one of the adjuster pockets.
Easy height adjustment
Installable in
any direction
Because the drain socket is
transparent, after the drain piping
has been installed, it is easy to
check if the drain come out
through the socket.
High setting provides maximum reach while low
setting minimises drafts.
Switchable fan speed: High/Low
175 mm
850 mm
30-48M
13-26M
5
6
CEILING MOUNTED CASSETTE TYPE
Round Flow
(Ceiling height is reference value)
Connection to a centralised control
system is available without option
Содержание PCSMT1420A
Страница 16: ...29 30 MEMO...