Daikin O-WCP16-SEP21-2, Установка, эксплуатация и обслуживание

Страница: 2 / 58

Issue: O-WCP16-SEP21-2 Page II
IMPORTANT!
READ BEFORE PROCEEDING!
GENERAL SAFETY GUIDELINES
This equipment is a relatively complicated apparatus. During installation, operation maintenance or service,
individuals may be exposed to certain components or conditions including, but not limited to: refrigerants, materials
under pressure, rotating components, and both high and low voltage. Each of these items has the potential, if
misused or handled improperly, to cause bodily injury or death. It is the obligation and responsibility of
operating/service personnel to identify and recognize these inherent hazards, protect themselves, and proceed safely
in completing their tasks. Failure to comply with any of these requirements could result in serious damage to the
equipment and the property in which it is situated, as well as severe personal injury or death to themselves and
people at the site.
This document is intended for use by owner-authorized operating/service personnel. It is expected that these
individuals possess independent training that will enable them to perform their assigned tasks properly and safely. It
is essential that, prior to performing any task on this equipment, this individual shall have read and understood this
document and any referenced materials. This individual shall also be familiar with and comply with all applicable
governmental standards and regulations pertaining to the task in question.
SAFETY SYMBOLS
The following symbols are used in this document to alert the reader to specific situations:
DANGER
Indicates a possible hazardous
situation which will result death or
serious injury if proper care is not
taken
CAUTION
Identifies a hazard which could lead
to damage to the machine, damage
to other equipment and/or
environmental pollution if proper
care is not taken or instructions are
not followed.
snipp
WARNING
Indicates a potentially hazardous
situation which will result in possible
injuries or damage to equipment if
proper care is not taken
NOTE
Highlights additional information
useful to the technician in completing
the work being performed properly.
CHANGEABILITY OF THIS DOCUMENT
In complying with Daikin ’ policy for con tinuous product improvement, the information contained in this document is
subject to change without notice. Daikin makes no commitment to update or provide current information automatically
to the manual owner. Updated manuals, if applicable, can be obtained by contacting the nearest Daikin Service office.
Operating/service personnel maintain responsibility for the applicability of these documents to the equipment. If there
is any question regarding the applicability of these documents, the technician should verify whether the equipment
has been modified and if current literature is available from the owner of the equipment prior to performing any work
on the equipment.