13
Read First
Preparation Before Operation
5
Attaching the deodorising filter
1.
Remove the front panel.
•
Push the protrusions (2 places on the left/right), pull
toward you, and remove.
Front panel
Protrusion
(2 places on the left/right)
1 Push
2 Pull toward
you
If the protrusion on the front panel is
detached
• Please attach it using the illustration as a reference.
Insert into the
hole on the
opposite side as
well
Protrusion
Back side of the front panel
1 Insert
2 Push
2.
Peel off the fixing tape (4 places) and remove
the cardboard.
Cardboard
Fixing tape
Fixing tape
(4 places)
3.
Remove the pre-filter.
•
While holding the tab in the centre, remove the hooks
(4 places on the left/right) from the holes in the unit
(4 places on the left/right).
Pre-filter
Holes
(4 places left/right)
Hooks
Hooks
(4 places left/right)
4.
Remove the dust collection filter.
•
Put your finger into the notch at the bottom of the unit,
then lift and remove the dust collection filter.
Dust collection filter
Notch at the bottom
of the unit
5.
Peel off the fixing tape and remove the
deodorising filter.
•
Pull the upper part of the deodorising filter toward you,
and remove it.
Fixing tape
Fixing tape
Deodorising filter
6.
Remove the deodorising filter from the bag.
Deodorising filter
Wear gloves when working.
(Dust from the deodorising filter may make your
hands dirty.)
•
Observe local waste separation rules when disposing
of the tape, filter bag and desiccant.
01_EN_3P648733-1A.indd 13
2021/07/14 15:10:39
