26
English
Advanced Settings
Function
1
2
3
4
Monitoring mode
within AUTO
Operation and
ECONO MODE
(ON/OFF)
Setting at the time of
purchase: ON
The sensitivity of the sensors
decrease while the fan is stopped
during Monitoring mode.
If you do not want the sensitivity
of the sensors to be decreased,
set to OFF.
• When set to OFF, Monitoring
mode will not be performed.
Can be performed either during
operation or while operation is
stopped.
Press
for about 5 seconds and
when a short beep sounds, press
MODE
while continuing to hold
down
.
Release both
and
MODE
when a short beep sounds.
The FAN lamp (Quiet) blinks, then lights up.
Blinking Lit up
According to the current setting, the ECONO
MODE lamp will be displayed as follows.
Blinking Lit up
ON
Unlit
OFF
Press
to change the setting
*
Each press cycles between ON and OFF.
Lit up
ON
Unlit
OFF
Press
MODE
A short beep sounds, the FAN
lamp (Quiet) blinks, and the
ECONO MODE lamp changes to
the following display according to
the setting.
Blinking
Blinking
ON
Unlit
OFF
While the lamp is blinking,
unplug the power supply plug,
wait at least 5 seconds, and
then insert the power supply
plug again.
Setting is now complete.
Power supply plug
Power
socket
• If this procedure is not
performed, the unit will not
return to the regular operation
mode.
• Settings are remembered
even if the unit is unplugged.
Airflow rate range
for AUTO FAN MODE
(4 Levels/3 Levels)
Setting at the time of
purchase: 4 Levels
If operating sound is a
concern during AUTO FAN
MODE, switch from 4 Levels
to 3 Levels.
• Airflow rate range
4 Levels: Quiet, Low,
Standard, High
3 Levels: Quiet, Low, Standard
Can be performed either during
operation or while operation is
stopped.
Press
MODE
for about 5 seconds
and when a short beep sounds,
press
while continuing to
hold down
MODE
. Release both
and
MODE
when a short
beep sounds.
AUTO FAN MODE lamp will light up after
blinking.
Blinking Lit up
FAN lamp (Standard) will display the current
setting.
Unlit
4 Levels
Blinking
Lit up
3 Levels
Press
MODE
to change the setting
*
The airflow rate switches between 4 Levels
and 3 Levels with each press.
Unlit
4 Levels
Lit up
3 Levels
Press
A short beep sounds, AUTO FAN
MODE lamp blinks, and the FAN
lamp changes as below
according to the new setting.
Blinking
Lit up
3 Levels
Unlit
4 Levels
*
If the lamps do not change even after the settings were changed, unplug the unit, wait at least 5 seconds, then re-insert the power supply plug
and repeat the above procedure from the beginning.