manualshive.com logo in svg

Daikin MC55WVM, Руководство по эксплуатации, Страница: 27 / 30

Поделиться
Скачать
Daikin MC55WVM Скачать руководство пользователя страница 27

26

English

Phenomenon

Check points

All the FAN lamps ( 

 (Quiet),   (Low), 

 (Standard), and 

 (Turbo)) blink 

together

• 

Are the pre-filter, outflow grille, and dust collection filter attached? 

 

These lamps may blink if the unit is operated without a part attached.

[If one or more parts are not attached]

 

¼

Unplug the power supply, re-attach the parts and then turn the unit on again.

[If all the parts are attached] 
An electrical component is faulty.

 

¼

Contact the place of purchase.

• 

Is there a buildup of dust on the pre-filter?

[If there is dust buildup] 

 

►

Page 19

 

¼

Unplug the power supply, clean the pre-filter and then turn the unit on again.

[If there is no dust buildup]
An electrical component is faulty.

 

¼

Contact the place of purchase.

• 

Is the air outlet blocked?

[If the air outlet is blocked]

 

¼

Remove any obstacles blocking the air outlet and then turn the unit on again.

[If the air outlet is not blocked]
An electrical component is faulty.

 

¼

Contact the place of purchase.

• 

These lamps may blink if there is a sudden voltage fluctuation.

 

The lamps will return to their previous condition once voltage returns to normal. 
Voltage range protection: 180V-264V

The dust sensor lamp remains 

orange or red

The PM2.5 INDICATOR lamp remain 

red, purple or brown

• 

Is there a buildup of dust in or around the air intake for the dust/PM2.5 sensor?

 

¼

Vacuum off any dust from the air intake using a cleaner. 

 

►

Page 19

• 

Is the cover detached from the air intake for the dust/PM2.5 sensor?

 

¼

Securely attach the cover. 

 

►

Page 19

• 

Is the lens for the dust/PM2.5 sensor dirty?

 

¼

Wipe off dirt from the lens using a dry cotton bud or similar. 

 

►

Page 19

• 

Is the pre-filter dirty?

 

 

►

Page 19

 

¼

Clean these parts.

After cleaning, the unit will return to normal operation a short while after being 
turned on.

There is an odour but the odour 

sensor lamp remains green

• 

Did an odour already exist around the time you inserted the power 

supply plug?

 

¼

The basic sensitivity of the odour sensor will be determined by odour 

levels in the first minute (approx.) after the power supply plug is inserted 

every time.

 

 

►

Page 7

 To adjust the basic sensitivity of the odour sensor, unplug the power supply 

when the air is clean (odour-free), wait at least 5 seconds, then re-insert 

the power supply plug and turn the unit on again.

Sometimes the streamer lamp does 

not light up

•  Depending on the degree of air impurity, streamer operation may turn OFF. 

The streamer lamp turns off when streamer operation is OFF. 

 

►

Page 16

• 

Is streamer output set to Low?

 

¼

If it is set to Low, the length of time the streamer operates will be shorter 

than when streamer output is set to Regular.  

 

►

Page 16

• 

Is the unit operating in ECONO MODE?

 

¼

The streamer lamp does not light up when the unit is in Monitoring mode.

 

 

 

►

Page 14

The streamer lamp blinks even 

though the streamer unit has been 

replaced

• 

After replacement, was the power supply plug inserted while pressing 

 on the unit?

 

 

►

Page 21

• 

Is the streamer unit’s connector properly installed?

[In case of improper installation]

 

¼

Unplug the power supply, re-attach the connector, and attempt operation 

again. 

 

►

Page 21

[In case of proper installation]
An electrical component is faulty.

 

¼

Contact the place of purchase.

The odour sensor lamp blinks

• 

Is the deodorising filter unit attached?

 

¼

Attach the deodorising filter unit. 

 

►

Page 20

Troubleshooting

01_EN_3P595629-1.indd   26

2019/12/19   10:38:13

Содержание MC55WVM































Отзывы:

Нет отзывов