Daikin MC401VE, Руководство по обслуживанию

Страница: 52 / 53

SiE74-202
Drawings & Flow Charts iii
Drawings & Flow Charts
A
Accessories ..............................................................5
B
Before changing filters, cleaning the equipment or
moving it, turn it OFF
and unplug the power cable
............................. iii
D
Do not block the intake or outlet ............................. iv
Do not disassemble, service
or modify this equipment .................................. iii
Do not insert fingers or objects into the openings
of the suction and discharge grilles .................. iv
Do not operate the equipment with wet hands ........ iii
Do not place water containers such as fish bowls
and flower vases near the equipment ...............v
Do not position the equipment on its side
or tilt it during use ..............................................v
Do not use in humid places or places
which might be wet, such as bathrooms .......... iv
Do not use in the place of kitchen fans
or cooker hood fans ......................................... iv
Do not use near to sources of heat
such as heaters ................................................ iv
Do not use outdoors or where exposed
to direct sunlight ............................................... iv
Do not use the equipment in a place
filled with oily smoke ........................................ iv
Do not use the equipment near a lighting fixture .... iv
Do not use the power cable if damaged
or loose in the socket ....................................... iii
Do not use the power cable if it is damaged ........... iii
Do not wipe with benzene or thinner,
or spray with insecticide ....................................v
E
Equipment does not Operate .................................20
H
Hold the plug to unplug the power cord from
the AC outlet. Do not pull the cord to unplug ....v
How to Change the Ion Filter (Roll) ........................16
How to Clean the lonizer ........................................14
How to Clean the Prefilter ......................................13
How to Operate the Unit ........................................12
I
If not using the unit for long periods of time,
unplug the power cable .....................................v
Indicator does not Change from
"Dirty" to "Clean" ............................................ 22
Indicator Lamps and their Functions ....................... 4
Installation ............................................................. 11
K
Keep the equipment 10 cm or more away
from the wall when used on a table .................iv
N
Names and Functions of Parts ................................ 4
Names and Functions of The Indicator Lamps ....... 9
P
Parts Illustration
MC401VE ....................................................... 41
Photocatalytic Operation does not Activate .......... 24
Prevent combustibles (hair sprays, etc.), sparks
and incense from being drawn into the unit .....iv
R
Remote Controller Fails to Operate Equipment .... 23
Removal of Electrical Parts (Inverter Lamp) ......... 31
Removal of External Accessories ......................... 28
Removal of Fan Motor ........................................... 36
Removal of Ionizing Wire ...................................... 30
Removal of PCB .................................................... 34
Removal of Safety Switch ..................................... 37
S
Setup ..................................................................... 10
T
Tips for appropriate use .......................................... 6
U
Use only 220-240 VAC 50 Hz power supply ........... iii
V
Ventilate the room frequently when used
together with a heating device ..........................v
W
Wiring Diagram
MC401VE ....................................................... 40