Daikin MC401VE, Руководство по обслуживанию

Страница: 16 / 53

SiE74-202 Operating Manual
Operation Manual 9
1.7 Names and Functions of The Indicator Lamps
A “Ionizer needs cleaning” lamp
Flashes when the ionizer is dirty. See page 14.
B Time to cut filter lamp/Reset button
This lamp lights up when it is time to change the ion filter. After
fitting a new filter, press
with ball-point pen, etc. See page 16.
C Timer settings
The selected OFF timer setting is lit. As time elapses, the remaining
time is displayed on the remote control. See page 12.
D Auto power save lamp
The lamp lights up in the auto mode once air is clean. This mode is
designed to cut electricity bills. See page 12.
E Pollen/Turbo mode lamps
The corresponding lamp is lit when the unit is in either the pollen or
Turbo mode. See pages 12.
F Inverter lamp
Lit while the inverter lamp is ON. The lamp can be turned OFF from
on the remote control. See page 12.
G Air Quality lamps
These lamps indicate how clean/dirty room air is.
Sharp fluctuations in temperature, humidity or odorless gases
(carbon monoxide) can cause lamps to light up and go out.
In the following cases, the lowest odor intensity is indicated for 1
minute regardless of the true intensity. There is nothing wrong
with the equipment.
Immediately after reattaching the front panel.
Immediately after plugging in the power cable.
H Signal reception window
Signals from the remote controller are received through this window.
J Fan speed lamp
The lamp under the set fan speed is lit. See page 12.
K Auto mode lamp
Lit when the unit is in the auto mode. See page 12.
L Mode selector (OFF) button
Every time the button is pressed, the mode switches as follows.
Low odor
intensity
High odor
intensity
Green Yellow Orange Red
Green Yellow Orange
Green Yellow
Green
•
•
•
•