4 Operation
Installation and operation manual
6
BS
Madoka wired remote controller
4P596265-1 – 2019.11
INFORMATION
▪ Depending on the type of indoor unit you are operating,
more or less menus may be available.
▪ In the main menu, the icon for each menu reflects the
current active setting or mode. When operating the
controller, the menu you navigate through can look
different from that represented in this manual.
▪ The controller only allows for basic operation of the
system. For advanced operation (setback, schedule
timer, …), see the Madoka Assistant app.
4.2
Operation mode
The indoor unit can operate in various operation modes.
Icon
Operation mode
Cooling.
In this mode, cooling will be activated as
required by the setpoint, or by Setback operation.
Heating
. In this mode, heating will be activated as
required by the setpoint, or by Setback operation.
Fan Only
. In this mode, air circulates without heating
or cooling.
Dry
. In this mode, the air humidity will be lowered with
a minimal temperature decrease.
The temperature and fan speed are controlled
automatically and cannot be controlled by the
controller.
Dry operation will not function if the room temperature
is too low.
Ventilation
.In this mode, the space gets ventilated,
but not cooled or heated.
Air Clean
. In this mode, the optional air cleaning unit
operates.
Venti Air Clean.
Combination of ventilation
and air clean operation.
Auto.
In Auto mode, the indoor unit automatically
switches between heating and cooling mode, as
required by the setpoint.
INFORMATION
Depending on the indoor unit, more or less operation
modes are available.
4.2.1
To set the operation mode
1
Navigate to the operation mode menu.
2
Use
and
to select an operation mode.
3
Press
to activate.
Result:
The indoor unit changes its operation mode and the
controller returns to the home screen.
4.3
Setpoint
The setpoint is the target temperature for the Cooling, Heating, and
Auto operation modes.
INFORMATION
The lower setpoint limit of the Cooling operation mode is
20°C, as per UAE Federal regulation UAE.S 5010-5:2016
clause 6, and UAE.S 5010-1:2016 clause 10.
4.3.1
To set the setpoint
Prerequisite:
The active operation mode is either 'Cooling',
'Heating', or 'Auto'.
1
In the home screen, use
and
to adjust the setpoint.
Result:
The indoor unit changes its temperature setpoint.
4.4
Date and time
Set the date and time for the indoor units connected to the controller.
4.4.1
To set date and time
1
Navigate to the date and time menu.
2
Press
to activate
.
Result:
The fields become editable.
3
Set the date and time. Set with
and
. Confirm with
.
Cycle through the menu until all fields are set correctly.
Result:
You set the date and the time.
INFORMATION
Confirming the value in a field will automatically bring you
to the next field. To finish making settings and leave the
menu, navigate to and confirm the value in the last field.