Daikin homecontrols EKRSIBDI1V3, Инструкция по установке и эксплуатации

Страница: 9 / 28

6
Hazard information
The accessory may only be used for fixed installations
and must be securely attached.
The accessory is part of the building installation. The
relevant national standards and directives must be tak-
en into consideration during planning and set-up. The
accessory has been designed solely for operation on a
230 V/50 Hz AC supply. Only qualified electricians (to
VDE 0100) are permitted to carry out work on the 230 V
mains. Applicable accident prevention regulations must
be complied with whilst such work is being carried out.
To avoid electric shocks from the accessory, please dis-
connect the mains voltage (trip the miniature cir-
cuit-breaker). Noncompliance with the installation in-
structions can cause fire or introduce other hazards.
When connecting to the terminals, take the permissible
cables and cable cross sections into account.
Take the technical data (in particular the maximum per-
missible effective installed load of the accessory and
the type of load to be connected) into account before
connecting a load! All load data relates to ohmic loads.
Do not exceed the capacity specified for the accessory.