2
English
1.
Open the suction grille.
Push the two knobs and slowly let the suction grille down.
2.
Take out the air filter.
Carry out the work in the order mentioned below.
1
2
1
Pull the air filter end inclined downward and unhook the
hooking hole of the air filter from the grille projection.
(both right and left)
Air filter
Hooking
hole
Grille
projection
2
Lift the air filter and unhook the hooking hole of the air
filter from the projection at the grille upper part. (both
left and right)
Grille projection
Hooking hole
Air filter
Grille projection
Lift up
3.
Clean the air filter.
Clean the dust with a vacuum cleaner or wash it with
water.
If the air filter is
extremely dusty,
wash it with
neutral detergent
using a soft brush.
After dewatering,
dry the air filter in
the shade.
NOTE
•
Do not wash the air filter with hot water of 122°F (50°C)
or higher.
It may cause discoloration and deformation.
•
When drying the air filter, do not heat it with fire. It may
cause burning.
•
Do not use chemicals such as gasoline, benzine, thin
-
ner, polishing powder and liquid insecticide.
It may cause discoloration and deformation.
4.
Attach the air filter.
Attach the air filter in the reverse order mentioned in
step 2.
5. Close the suction grille.
Slowly push up the suction grille, and finally while pushing
the two knobs, securely fix the suction grille to the decora
-
tion panel.
6.
Reset the filter sign displayed on the remote control
-
ler after turning on the power supply.
•
For details, refer to the operation manual attached to
the remote controller.
The sign can be turned off whether in operation or at
stop.
01_EN_3P494229-2D.indd 2
2021/12/03 9:35:21