Daikin FXZA15A2VEB Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 84

Daikin FXZA15A2VEB Скачать руководство пользователя страница 17

3

|

Specific installer safety instructions

Installer and user reference guide

17

FXZA15~50A2VEB
VRV system air conditioner
4P599623-1A – 2020.06

WARNING: MILDLY FLAMMABLE MATERIAL

The refrigerant inside this unit is mildly flammable.

Electrical installation (see

"18 Electrical installation"

WARNING

▪

If the power supply has a missing or wrong N-phase, equipment might break
down.

▪

Establish proper earthing. Do NOT earth the unit to a utility pipe, surge absorber,
or telephone earth. Incomplete earthing may cause electrical shock.

▪

Install the required fuses or circuit breakers.

▪

Secure the electrical wiring with cable ties so that the cables do NOT come in
contact with sharp edges or piping, particularly on the high-pressure side.

▪

Do NOT use taped wires, stranded conductor wires, extension cords, or
connections from a star system. They can cause overheating, electrical shock or
fire.

▪

Do NOT install a phase advancing capacitor, because this unit is equipped with an
inverter. A phase advancing capacitor will reduce performance and may cause
accidents.

WARNING

▪

All wiring MUST be performed by an authorised electrician and MUST comply
with the applicable legislation.

▪

Make electrical connections to the fixed wiring.

▪

All components procured on-site and all electrical construction MUST comply
with the applicable legislation.

WARNING

ALWAYS use multicore cable for power supply cables.

WARNING

Use an all-pole disconnection type breaker with at least 3 mm between the contact
point gaps that provide full disconnection under overvoltage category III.

WARNING

If the supply cord is damaged, it MUST be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.

CAUTION

▪

Each indoor unit has to be connected to a separate user interface. Only a safety
system compatible remote controller can be used as the user interface. See
technical data sheet for remote controller compatibility (e.g. BRC1H52/82*).

▪

The user interface has to be put in the same room as the indoor unit. For details,
please refer to the installation and operation manual of the user interface.

«
...
15
16
17
18
19
...
»

Содержание FXZA15A2VEB





















































































Отзывы:

Нет отзывов