Daikin FXDQ20PBVE, Руководство по эксплуатации

Страница: 6 / 9

3 English
• Do not wash the air conditioner with water,
as this may result in electric shocks or fire.
• Consult your dealer regarding cleaning the
inside of the air conditioner.
Improper cleaning may cause breakage of plas-
tic parts, water leakage and other damage as
well as electric shocks.
• Watch your steps at the time of air filter
cleaning or inspection.
High-place work is required, to which utmost
attention must be paid.
If the scaffold is unstable, you may fall or topple
down, thus causing injury.
〈
Maintenance and inspection
〉
• Clean the drain pan periodically. The drain
pipes clogged with dust will cause water leak-
age.
• For cleaning, consult with your Daikin dealer.
(Before each season when cooling or heating is
required, clean the air conditioner.)
• If the area around the indoor unit is very dusty,
use a dust-proof cover (local procurement).
〈
Cleaning the inside of the indoor unit
〉
• It is necessary to clean the inside of the indoor
unit periodically.
Since the cleaning requires special technolo-
gies, request a Daikin dealer to clean them.
Daily maintenance:
〈
Cleaning the air filter
〉
Explanation
• Removing the air filter except when cleaning the
air conditioner may result in accidents.
• When the mark is displayed on the remote
controller, please clean the filter.
• When the operating time exceeds the desig-
nated time, this mark will be displayed.
• If using the air conditioner under very dusty
environment, increase the frequency of air filter
cleaning.
• When you want to change the setting time until
the mark is displayed, consult with your
dealer.
(The default factory setting is 2500 hours.)
• There are the following time, display pattern.
1250, 2500, 5000, 10000
1. Remove the air filter.
2. Clean it.
CAUTION
• Do not wash the air conditioner with hot water of
more than 50°C. Doing so may result in discol-
oration or deformation.
• Never dry the filter by direct firing. Doing so
may result in burning.
• For cleaning local procurements, consult with
your dealer.
(1) Use a vacuum cleaner (A) or wash the air filter
(B) to remove dust and trash.
(A) Remove dust and trash using a vacuum
cleaner.
(B) Wash it with water.
When the air filter is very dirty, use a soft brush
and neutral detergent.
↓
Dewater and dry in the shade.
3. Attach the air filter.
4. Push the “filter sign reset” button on the
remote controller.
The display “ ” vanishes.
In case of bottom side
In case of back side
Filter
Force
Force
Main unit
Attach the filter to the
main unit while pushing
down on the bends.
01_EN_3PN09040-1.fm Page 3 Friday, February 29, 2008 1:32 PM