9
(6) Hook the indoor unit onto the installation panel. (Refer to Fig. 9)
•
Placing buffering material between the wall and the indoor unit at this time will make work easier.
For bottom-right and back-right piping
•
Pass the drain hose and the refrigerant piping to the wall.
(7) Pass power supply wiring and ground wiring threaded through conduit (For connecting the con-
duit to the unit, see “8-1 HOW TO CONNECT WIRINGS”), and remote controller wiring through the
wiring guide in through the back of the indoor unit and to the front.
(8) Connect the piping. (See “5.REFRIGERANT PIPING WORK” and Fig. 10)
•
Seal the piping through-hole with putty corking material.
(9) Push on both bottom edges of the indoor unit using both hands and hook the tab on the back of
the indoor unit onto the installation panel (1). (Refer to Fig. 9)
•
At this time remove the buffering material placed in step (6).
•
Make sure power supply wiring, transmission wiring, ground wiring and remote controller wiring are not
caught inside the indoor unit.