Procedure to Remove Electric Parts and Remote Controller
Si241306
4
Removal Procedure
2. Procedure to Remove Electric Parts and Remote
Controller
Procedure
Warning Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Step
Procedure
Points
1
To remove switch box
cover, dismount screw
(A), loosen screw (B)
and slide the cover to
right side.
Remove suction air
thermistor from bell
mouth.
2
The figure right shows
part layout inside switch
box.
3
Disconnect remote
controller cord from
switch box.
Switch box cover
A
A
B
Capacitor for fan
Control PCB
Power supply PCB
Remote controller
terminal strip
Heat exchanger
thermistor
Suction air thermistor
Lead wire for fan motor
LED-B
LED-A