![background image](http://html1.mh-extra.com/html/daikin/fvxs25r2v1a/fvxs25r2v1a_operation-manual_4703953029.webp)
27
1. Open the front panel. (page 26.)
2. Remove the air filter.
• Press the claws on the right and left of the air
filter down slightly, then pull upward.
3. Take off the titanium apatite
photocatalytic air-purifying filter.
• Hold the tabs of the frame, and remove the
claws in 4 places.
4. Clean or replace each filter.
See figure.
5. Set the air filter and titanium apatite
photocatalytic air-purifying filter as
they were and close the front panel.
• Operation without air filter may result in
troubles as dust will accumulate inside the
indoor unit.
■
Air filter
1. Wash the air filter with water or clean them with
vacuum cleaner.
• If the dust does not come off easily, wash them with neutral
detergent thinned with lukewarm water, then dry them up in the
shade.
• It is recommended to clean the air filter every 2 weeks.
■
Titanium apatite photocatalytic
air-purifying filter
The titanium apatite photocatalytic air-purifying filter can be renewed by washing it with water once
every 6 months. We recommend replacing it once every 3 years.
[ Maintenance ]
1. Vacuum dusts, and soak in warm water or water for about 10 to 15
minutes if dirt is heavy.
• Do not remove filter from frame when washing with water.
2. After washing, shake off remaining water and dry in the shade.
• Since the material is made out of paper, do not wring out the filter when removing water
from it.
[ Replacement ]
1. Remove the tabs on the filter frame and replace with a new filter.
• Dispose of the old filter as flammable waste.
Filters
Air filter
Titanium apatite
photocatalytic
air-purifying filter
01_EN_3P278434-4C.fm Page 27 Thursday, August 18, 2016 11:22 AM
Содержание FVXS25R2V1A
Страница 2: ......
Страница 35: ......
Страница 38: ...00_CV_3P705032 9 indd 2 30 08 2022 3 15 35 pm...