English
15
2. Turn the MAIN/SUB CHANGEOVER SWITCH on one of the two remote controller PC boards to “S”.
(Leave the switch to the other remote controller set to “M”.)
10. INSTALLATION OF AIR INTAKE GRILLE
1. Hook the air intake grille on the groove on the unit’s bottom frame in the order of (1)
→
(2). (See below figure.)
2. Fit the grille stopper (front panel) into the groove on the air intake grille and lock the
grille down in its original place by screw. (See below figure)
* Be careful not to overtighten screws.
S
M
M
S
(Factory setting)
Remote controller
PC board
Only one remote controller
needs to be charged.
Air intake grille
Air intake
grille
Bottom frame
Bottom frame
(1)
(1)
(2)
(2)
M4 × 12
Screw
Front panel
Grille stopper
Air intake grille
Air intake grille
Bottom frame
01_EN_3PA60136-8Y.fm Page 15 Saturday, December 22, 2007 1:04 PM